ZONCN Z2000 Series General Purpose Vector Control Inverter
Features
-
Senseless flux vector control (VC) V/F (Voltage/Frequency) Control
-
Overload capacity is 60s for 150% of the rated current, 3s for 180% of the rated current.
-
There are ten auxiliary frequency sources.
-
It can implement fine tuning of auxiliary frequency and frequency synthesis
-
Support PM motor (Z2000T series)
- Input voltage: 1phase 220v; 3 phase 220v; 3 phase 380v/440v/480v
-
Power range: 220V 0.4~7.5kW; 380V 0.4~1000kW
Product description
| Item | Z2000 |
| Standard Function | Control mode | Senseless flux vector control(SFVC) ; Voltage/Frequency (V/F) control |
| Maximum frequency | Vector control: 0-320Hz ; V/F control: 0-3200Hz |
| Carrier frequency | 1-16kHz ; The carrier frequency is automatically adjusted based on the load features |
| Input frequency solution | Digital setting: 0.01Hz ; Analog setting: maximum frequency x 0.025% |
| Startup torque | G type: 0.5Hz/150%(SFVC) ; P type: 0.5Hz/100% |
| Speed range | 1:100 |
| Speed stability accuracy | ±0.5% |
| Overload capacity | G type: 60s for 150% of the rated current, 3s for 180% of the rated current. P type: 60s for 120% of the rated current, 3s for 150% of the rated current. |
| Torque boost | Auto boost ; Customized boost 0.1%-30.0% |
| V/F curve | Line V/F curve; Multi-point V/F curve; N-power V/F curve |
| V/F separation | Two types: complete separation; half separation |
| Ramp mode | Straight-line ramp ; S-curve ramp ; Four groups of acceleration/deceleration time with the range of 0.0-6500.0s |
| DC braking | DC braking frequency : 0.0Hz to maximum frequency Braking time: 0.0~100.0s Braking action current value: 0.0%~100.0% |
| JOG control | JOG frequency range: 0.00~50.00Hz JOG acceleration/deceleration time: 0.0~6500.0s |
| Onboard multiple preset speeds | It implements up to 16 speeds via the simple PLC function or combination of X terminal states. |
| Onboard PID | It realizes process-controlled closed loop control system easily |
| Auto voltage regulation(AVR) | It can keep constant output voltage automatically when the mains voltage changes. |
| Auto voltage/ Over current stall control | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to overvoltage/over current |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive |
| Torque limit and control | It can keep constant output voltage automatically when the mains voltage changes |
Specification
| Specification | | | | |
| Model | Rated Output Power(kW) | Rated Input Current(A) | Rated Output Current(A) | Motor Equipped(kW) |
| Input Voltage:1PH or 3PH AC 220V±15% |
| Z2200-0R4G | 0.4 | 5.4 | 2.5 | 0.4 |
| Z2200-0R75G | 0.75 | 7.2 | 5 | 0.75 |
| Z2200-1R5G | 1.5 | 10 | 7 | 1.5 |
| Z2200-2R2G | 2.2 | 16 | 11 | 2.2 |
| Z2200-3R7G | 3.7 | 23 | 16.5 | 3.7 |
| Z2200-5R5G | 5.5 | 21 | 25 | 5.5 |
| Z2200-7R5G | 7.5 | 31 | 32 | 7.5 |
| Input Voltage:3PH AC 380V±15% |
| Z2400-0R75G | 0.75 | 3.8 | 2.5 | 0.75 |
| Z2400-1R5G | 1.5 | 5 | 3.7 | 1.5 |
| Z2400-2R2G | 2.2 | 5.8 | 5 | 2.2 |
| Z2400-3R7G/5R5P | 3.7/5.5 | 10/15.0 | 9/13 | 3.7/5.5 |
| Z2400-5R5G | 5.5 | 15 | 13 | 5.5 |
| Z2400-7R5G/11P | 7.5/11 | 20/26 | 17/25 | 7.5/11 |
| Z2400-11G/15P | 11/15 | 26/35 | 25/32 | 11/15 |
| Z2400-15G/18.5P | 15/18.5 | 35/38 | 32/37 | 15/18.5 |
| Z2400-18.5G/22P | 18.5/22 | 38/46 | 37/45 | 18.5/22 |
| Z2400-22G/30P | 22/30 | 46/62 | 45/60 | 22/30 |
| Z2400-30G/37P | 30/37 | 62/76 | 60/75 | 30/37 |
| Z2400-37G/45P | 37/45 | 76/90 | 75/90 | 37/45 |
| Z2400-45G/55P | 45/55 | 90/105 | 90/110 | 45/55 |
| Z2400-55G | 55 | 105 | 110 | 55 |
| Z2400-75G/90P | 75/90 | 140/160 | 150/176 | 75/90 |
| Z2400-90G/110P | 90/110 | 160/210 | 176/210 | 90/110 |
| Z2400-110G/132P | 110/132 | 210/240 | 210/253 | 110/132 |
| Z2400-132G/160P | 132/160 | 240/290 | 253/300 | 132/160 |
| Z2400-160G/185P | 160/185 | 290/330 | 300/340 | 160/185 |
| Z2400-185G/200P | 185/200 | 330/370 | 340/380 | 185/200 |
| Z2400-200G/220P | 200/220 | 370/410 | 380/420 | 200/220 |
| … | | | | |
Description of namepate
Application
Wiring diagram
Company Introduction
Wuhu ZONCN is a professional manufacturer focus on of inverters and servo products. We are established in 2005, our headquarters is in Shanghai, with factories area about 100,000 square meters. For inverter, we have 6 main series, NZ100, NZ200, Z2000, Z8000, T9000, and Z5000-BF (IP65/IP54 protection), to meet various application requirements. We have our own R&D team, so we keep upgrading the series gradually.
Now our products are exported to more than 50 countries in Europe, Africa, Asia and America, etc. All our products have passed CE. They are widely used in textile, print, CNC machine, food package, injection machine, extrude machine, fan, pump, water treatment, industrial washing machine, air compressor and many industrial applications.
Exhibition
FAQ
Q1. What is your MOQ?
A: 1 Unit.
Q2. What kinds of inverter you can do?
A: input single phase 220v, output 3 phase 220v
input 3 phase 220v, output 3 phase 220v
input 3 phase 380v, outputput 3phase 380v
input single phase 220v, output 3phase 380v
Q3. What is the power range you can do ?
A: We can prodduce from 0.4 kw to 1000 kw.
Q4. What is your terms of payment?
A: 100% in advance by T/T, Paypal, etc.
Q5. What is your lead time?
A: Normally, within15 days after receiving payment.
Q6. What is your warranty period?
A. 18 months after delivery.
Q7. Can you produce for OEM brand?
A. Sure, we have lots of experience for doing OEM.
Product Tags:
|
|
220v 380V Inversor 1hp Pump Inverter Single Phase Input 0.75kw VSD Images
|
